Get 20% off all challenges

SMT Divergence: How to Spot and Trade It on Correlated Markets

SMT divergence explained: what SMT means in trading, the correlated pairs to compare, bullish vs bearish SMT, entry, stop and target, and 2 worked examples.

Gianluca Pizzituti••14 min read
Share article
SMT Divergence: How to Spot and Trade It on Correlated Markets

One account, every market we offer

Explore all markets

SMT divergence is a disagreement between two markets that normally move together: one makes a new high or low and the other does not. SMT stands for smart money technique (some traders say smart money tool), and it comes from the ICT method. Traders read the disagreement as a hint that the new high or low was a stop run and not the start of a trend.

SMT trading does not use an indicator. You put two related charts next to each other, for example the S&P 500 and the Nasdaq-100, and compare their swing highs and lows at a level you marked in advance. This guide covers the pairs to compare, bullish and bearish SMT, how to spot it, how it differs from RSI divergence, and 2 worked examples.

Quick answer: SMT divergence happens when two correlated markets stop confirming each other at a key level. In a bearish SMT, one market makes a higher high while the other makes a lower high. In a bullish SMT, one makes a lower low while the other holds a higher low. It is a warning, not an entry: traders wait for a break of structure and enter on the pullback.

Highlights of this article

  • SMT in trading means smart money technique: a comparison of swing highs and lows on two correlated markets, with no indicator involved
  • Common pairs are ES and NQ, EUR/USD and GBP/USD (with the dollar index as the inverse check), BTC and ETH, and gold and silver
  • Bearish SMT forms at highs, bullish SMT forms at lows, and both matter most when one market has just swept an obvious level
  • RSI divergence compares price with its own momentum; SMT compares price with another market's price
  • There is no verified win rate for SMT, so treat it as a filter and backtest your own rules

What is SMT divergence?

Most of the time, closely related markets print the same swings. When US stocks rally, the S&P 500 and the Nasdaq-100 usually both make a higher high. When the dollar weakens, the euro and the pound usually both rise. SMT divergence is the moment that agreement breaks:

  • Market A trades above its previous high. Market B, which normally follows, stops short of its own previous high.
  • Or Market A trades below its previous low while Market B holds above its own.

If the move were backed by broad buying or selling, both markets would have confirmed it. Only one did, so the new extreme may be a run on resting stops. That is why SMT is taught inside ICT trading, next to the idea of a liquidity sweep: the sweep tells you where stops were taken, and SMT is a second opinion on whether the sweep was real.

The idea is older than the name. Dow theory, more than a century ago, held that the stock averages must confirm each other and treated a split between them as a warning. SMT applies that logic to intraday swings. The "smart money" label is jargon: the pattern does not prove who is buying.

Which markets do traders compare?

SMT only makes sense between markets with a strong, stable relationship. Correlation is measured on a scale from -1 to +1: values near +1 mean two markets move together, and values near -1 mean they move in opposite directions.

Pair Relationship What you compare
ES and NQ (S&P 500 and Nasdaq-100 futures) Positive Session highs and lows on both
EUR/USD and GBP/USD Positive Swing highs and lows on both
EUR/USD and the US dollar index (DXY) Inverse A low on EUR/USD against a high on DXY
BTC and ETH Positive Daily and session highs and lows
Gold and silver Positive Daily highs and lows

The euro is 57.6% of the dollar index and the pound 11.9%, which is why EUR/USD mirrors it so closely. With an inverse pair you compare opposite extremes: if EUR/USD makes a lower low, the dollar index should make a higher high. If it does not, that is the divergence.

Correlation is not fixed. It drifts with news, earnings and interest rate expectations, and two markets can separate for a real reason, such as one large technology stock moving the Nasdaq-100 more than the S&P 500.

Bullish vs bearish SMT divergence

Bearish SMT Bullish SMT
Where it forms At highs, above buy-side liquidity At lows, below sell-side liquidity
Market A Makes a higher high Makes a lower low
Market B Makes a lower high or an equal high Makes a higher low or an equal low
What traders expect A move down toward the lows A move up toward the highs
What cancels it Market B later breaks its high as well Market B later breaks its low as well

The last row matters. If the lagging market breaks its level a few candles later, both have confirmed the move and the divergence is gone.

How do you spot SMT divergence, step by step?

  1. Choose one pair and keep it. Put both charts on the same timeframe. Switching pairs until one shows a divergence is curve fitting.
  2. Mark the level on both charts before the session. Use levels where stops rest: the previous day high and low, the Asian session high and low, or clear equal highs and lows.
  3. Wait for one market to trade through its level. This is the sweep. A divergence away from any marked level is noise.
  4. Check the other chart at the same moment. Did it also trade through its matching level? If yes, there is no SMT. If it stopped short, you have a candidate.
  5. Wait for the candle to close. The sweeping market should close back inside its level. A close beyond the level that holds is a breakout.
  6. Wait for a structure shift. A break of structure against the sweep, on a candle close, turns the divergence from an observation into a setup.

Tablet and laptop side by side in a dark room, each showing a candlestick chart
SMT is read by eye: two related charts, same timeframe, same session, compared at a level marked in advance.

SMT divergence vs RSI divergence

Both are warnings that a move may be losing support, but they measure different things.

SMT divergence RSI or oscillator divergence
Compares Price of market A with price of market B Price with its own momentum reading
Bearish signal A makes a higher high, B does not Price makes a higher high, RSI makes a lower high
Bullish signal A makes a lower low, B does not Price makes a lower low, RSI makes a higher low
Main weakness Correlation can break for fundamental reasons Can repeat many times in a strong trend

The chart below shows the classic oscillator version, a bearish divergence on the RSI indicator, for comparison.

Bearish RSI divergencePrice makes a higher high while RSI makes a lower high, a sign that upside momentum is fading before price turns lower.100.00102.50105.00107.50RSI (14)7030RSI highLower highHigher high
Bearish RSI divergence. Divergence is a warning, not a trigger. Traders usually wait for price to confirm, for example by breaking the last swing low. Illustrative prices.

StockCharts' ChartSchool notes that RSI divergences are misleading in a strong trend, where several can appear before price turns. SMT has the same problem in another form: in a strong trend, one index can lead the other for hours. Some traders use both checks together. Neither is a trigger without price confirming.

Which timeframes and sessions work best?

SMT appears on any timeframe. In practice, traders split the job in two.

  • Higher timeframe for the level. The daily and 4-hour charts give the previous day and previous week highs and lows, where the larger pools of stops rest.
  • Lower timeframe for the divergence. The 15-minute and 5-minute charts show which market swept and which did not. On a 1-minute chart, small differences in spread and data feed create divergences that mean nothing.

Session timing matters because the comparison needs both markets to be active. The Bank for International Settlements' 2025 survey found that the UK handled about 38% of global foreign exchange turnover and the US about 19%, which is why currency SMT is usually read at the London open and the New York open. Index SMT is cleanest around the US cash open at 09:30 New York time. Our guide to forex market hours lists the session times in UTC.

Entry, stop and target

SMT gives you a bias and a location. The entry comes from the same sequence used in the rest of the ICT model.

  • Entry. After the structure shift, place a limit order in the fair value gap left by the displacement candle, or at the order block the move started from.
  • Which market to trade. Traders disagree. Some trade the market that swept, because its stop level is obvious. Others trade the one that refused. Pick one rule and test it.
  • Stop. Beyond the extreme of the sweep on the market you trade.
  • Target. The opposing liquidity: the other side of the session range first, then the previous day high or low.

Size the position from the stop distance, not from how convincing the two charts look together. The position size calculator does the arithmetic.

Worked example 1: bearish SMT on ES and NQ

The prices below are illustrative. They show the logic, not a real trading day.

The previous day high is 6,850.00 on ES and 25,400.00 on NQ. Both are marked before the open.

Step ES (S&P 500 futures) NQ (Nasdaq-100 futures)
Previous day high 6,850.00 25,400.00
09:50 New York: session high 6,856.25, above the level 25,371.00, below the level
5-minute close 6,846.50, back under 6,850.00 Never reached 25,400.00
Structure shift Close at 6,835.50, below the swing low at 6,838.00 Also breaks its last swing low
Fair value gap 6,840.00 to 6,844.00

ES swept its previous day high. NQ made a lower high. That is bearish SMT, and it becomes a setup when ES closes below 6,838.00.

  • Entry: short ES at 6,842.00, inside the gap
  • Stop: 6,858.25, above the sweep high of 6,856.25
  • Risk: 16.25 points
  • Target: the morning low at 6,801.00, which is 41 points away
  • Reward to risk: about 2.5 to 1

If NQ had pushed through 25,400.00 while you waited for the pullback, the divergence would be gone and the order should be cancelled.

Worked example 2: bullish SMT on EUR/USD and GBP/USD

Again, the prices are illustrative.

The Asian session low is 1.1620 on EUR/USD and 1.3350 on GBP/USD. On the dollar index, the Asian high is 98.40.

  • At 03:10 New York time, in the London open, GBP/USD drops to 1.3338, 12 pips below its Asian low.
  • EUR/USD bottoms at 1.1627 in the same minutes, a higher low.
  • The dollar index peaks at 98.36 and does not make a higher high. The inverse check agrees.
  • GBP/USD closes the 5-minute candle back above 1.3350, then closes at 1.3372, above the last swing high at 1.3368.
  • The displacement leaves an order block between 1.3356 and 1.3362.

The trade on GBP/USD:

  • Entry: long at 1.3360
  • Stop: 1.3334, 4 pips below the sweep low
  • Risk: 26 pips
  • First target: the Asian high at 1.3412, 52 pips away, or 2 to 1
  • Second target: the previous day high at 1.3440, 80 pips away, or about 3 to 1

Trading screen with a candlestick chart above a volume panel and a line indicator
An oscillator compares price with itself. SMT replaces the lower panel with a second market.

Common SMT divergence mistakes

  • Comparing unrelated markets. If the two charts do not normally move together, a difference between them says nothing.
  • Mismatched swings. Comparing a 5-minute high on one chart with a 1-hour high on the other, or a London high with a New York high.
  • Trading the divergence alone. Without a sweep before it and a structure shift after it, SMT is only an observation.
  • Ignoring the reason. An earnings report or a central bank decision can pull one market away for hours. That is repricing, not a stop run.
  • Hunting for it. If you watch 4 pairs on 3 timeframes, one of them will always show a divergence somewhere.

What are the limits of SMT divergence?

No verified, independent win rate data exists for SMT divergence. Figures quoted on social media come from hand picked examples or unaudited backtests. We do not quote a win rate here because we cannot check one.

There are structural limits too. Correlations change, and a pair that confirmed every swing for months can decouple for weeks. The pattern is discretionary, and textbook cases are chosen in hindsight. Write exact rules for the pair, the level, the timeframe and the confirmation, then run them through backtesting on your own market before risking money.

Using SMT divergence in a prop firm challenge

Velotrade challenges are simulated, educational evaluations on DXtrade, with crypto, forex, stocks, index ETFs and commodities on one account. That covers several SMT pairs: EUR/USD and GBP/USD, BTC and ETH, gold and silver. Index exposure is through ETFs such as SPY and QQQ, so use those two for the index comparison.

  • Risk one market, not both. The same idea on EUR/USD and GBP/USD doubles the risk on one view.
  • Know the limits in dollars. The daily loss limit is 4% on the Classic 1-Step, 5% on the Classic 2-Step and 3% on the PRO 1-Step, with a static maximum drawdown of 7%, 10% and 3%, fixed from the starting balance.
  • Cap attempts per session. One or two attempts per session keeps a bad morning inside the daily limit.

SMT pairs well with the daily candle model in power of three trading, where the divergence often appears during the false move of the day.

This article is educational and is not investment advice. Velotrade challenges are simulated evaluations.

Sources

Frequently Asked Questions

About the author

Gianluca Pizzituti

Gianluca Pizzituti

Chief Executive Officer

Formerly on the derivatives desk at Dresdner Kleinwort in London, then founded and ran a proprietary HFT firm in FX and equity indices out of Singapore.

Velotrade was founded in Hong Kong in 2016 by a team from JP Morgan, Dresdner Kleinwort and Bank of America, has facilitated over $2.5 billion in trade-finance payments, and has been featured in Bloomberg, the Financial Times, the Wall Street Journal and on Nasdaq. Its prop trading evaluations are simulated and educational.

View author page

Ready to trade with
$200,000 capital?

Up to 90% profit split

Keep most of what you earn

No consistency rule

News trading allowed

Payouts within 24 hours

Once approved