One account, every market we offer
Explore all marketsA Keltner channel is a volatility envelope drawn around price: an exponential moving average in the middle, with an upper and a lower line set a multiple of the Average True Range away from it. When the market gets more volatile the channel widens, and when it calms the channel narrows. Most candles sit inside it.
Traders use it to read trend direction from the slope, to spot unusual strength when price closes outside a line, and to time entries on pullbacks to the middle. This guide covers the origin, the formula with numbers, 3 setups with illustrative entries, stops and targets, and how it differs from Bollinger Bands and Donchian channels. For the wider toolkit, see our guide to technical indicators.
Quick answer: A Keltner channel plots a 20-period EMA with bands 2 times the 10-period ATR above and below it. Chester Keltner described the first version in 1960, and Linda Bradford Raschke introduced the ATR version in the 1980s. A close above the upper line shows strength, a close below the lower line shows weakness, and the slope of the channel shows the trend.
Highlights of this article
- The modern channel is a 20-period EMA plus and minus 2 times the 10-period ATR
- Chester Keltner's 1960 original used a 10-day simple average of typical price and the average high to low range
- A close outside the channel is a sign of momentum, not an automatic reversal signal
- The squeeze appears when Bollinger Bands contract inside the Keltner channel, and it says nothing about direction
- Keltner lines are smoother than Bollinger Bands because ATR changes more slowly than standard deviation
What is a Keltner channel?
A Keltner channel is an overlay of 3 lines on the price chart.
- Middle line: an exponential moving average of price, usually 20 periods.
- Upper line: the middle line plus a multiple of ATR.
- Lower line: the middle line minus the same multiple of ATR.
The middle line follows the trend. Because the width comes from the ATR indicator, the channel accounts for gaps and long wicks, not only for closing prices.
Investopedia describes Keltner channels as volatility-based bands placed on either side of price that help identify trend direction. Think of the channel as a map of where price normally trades around its average.
Who created Keltner channels?
There are 2 versions, built about 20 years apart.
The 1960 original. According to StockCharts ChartSchool, Chester Keltner introduced the "Ten-Day Moving Average Trading Rule" in his 1960 book How to Make Money in Commodities. The centre line was a 10-day simple moving average of the typical price, which is the high, low and close added together and divided by 3. The channel lines were that average plus and minus a 10-day simple moving average of the high to low range.
The 1980s update. ChartSchool credits Linda Bradford Raschke with the newer version, which replaced the high to low range with the Average True Range and is the one most charting platforms plot today. The centre line became an exponential moving average.
The simple high to low range ignores gaps between sessions. ATR includes them.
Some platforms still offer the original under the same name, so check which formula is selected.
What is the Keltner channel formula?
Middle line = EMA(20)
Upper line = EMA(20) + 2 x ATR(10)
Lower line = EMA(20) - 2 x ATR(10)
StockCharts lists these as its defaults, written (20, 2.0, 10). Investopedia notes that the ATR is typically taken over 10 or 20 periods.
A worked calculation
The prices here are illustrative. A stock closes at $151.20. Its 20-period EMA is $150.00 and its 10-period ATR is $2.50.
- Band offset: 2 x $2.50 = $5.00.
- Upper line: $150.00 + $5.00 = $155.00.
- Lower line: $150.00 - $5.00 = $145.00.
- Channel width: $10.00, or 6.7% of the middle line.
Now suppose a volatile week pushes ATR to $4.00 while the EMA sits at $151.00. The offset becomes $8.00, so the lines move to $159.00 and $143.00. The channel is 60% wider even though the average barely moved. A price of $156.00 was outside the old channel and is inside the new one. "Far from the average" is defined by recent volatility, not by a fixed distance.

How do you read a Keltner channel?
Read 4 things, in this order.
- Slope. A rising channel means an uptrend, a falling channel a downtrend, and a flat channel a range. This is the same reading you take from moving averages, since the middle line is one.
- Closes outside the lines. With a 2x multiplier, most bars close inside. A close above the upper line means price moved more than 2 ATRs from its average. StockCharts describes a surge above the upper line as a show of extraordinary strength. In a trend, that is a continuation sign.
- Which half price lives in. In a healthy uptrend, price holds between the middle and upper lines. Repeated closes below the middle line warn that the trend is tiring.
- Width. A narrowing channel means falling volatility. A widening channel means rising volatility. Width alone has no direction.
The most common mistake is to treat the upper line as overbought in every market. In a trend, price can ride it for weeks. The lines work as overbought and oversold markers only when the channel is flat.
3 Keltner channel strategies
All prices below are illustrative. Each setup is a template to check with backtesting on your own market and timeframe.
Strategy 1: the trend pullback
You trade with the slope and buy a dip to the average.
Conditions: the channel is rising, and price has recently closed above the upper line at least once, which confirms momentum. Price then drifts back to the middle line.
Entry: the first bar that closes back up after touching the middle line.
Using the stock from the worked calculation, with the EMA at $150.00 and ATR at $2.50:
| Step | Level | Reason |
|---|---|---|
| Entry | $150.80 | Bullish close after a touch of the middle line |
| Stop | $147.05 | 1.5 ATR below entry, under the pullback low |
| Risk per share | $3.75 | $150.80 - $147.05 |
| Target 1 | $155.00 | The upper line, 1.1 times the risk |
| Target 2 | $158.30 | 2 times the risk, if momentum continues |
Many traders close half at the upper line and trail the rest under the middle line. For shorts in a falling channel, mirror every step.
Strategy 2: the channel breakout
This setup follows the signal StockCharts describes for the start of a trend: the channel turns up and price breaks above the upper line.
Conditions: the channel has been flat for at least 20 bars. A bar then closes outside a line, and the middle line starts to tilt the same way.
An illustrative 1-hour EURUSD example, with the EMA at 1.0850 and ATR at 0.0012. The upper line is 1.0874 and the lower line is 1.0826.
- Entry: 1.0880, on the hourly close above the upper line.
- Stop: 1.0850, at the middle line. Risk is 30 pips.
- Target: 1.0940, which is 60 pips or 2 times the risk.
- Exit early: if a bar closes back below the middle line.
The weak point is the false break, especially in thin hours. Require the channel to be visibly turning, and skip breaks straight into a major level. Our guide to breakout trading covers retests and failed breaks in more depth.
Strategy 3: the squeeze
The squeeze uses 2 envelopes at once. Bollinger Bands are built from the standard deviation of closes, which reacts quickly. The Keltner channel is built from ATR, which reacts slowly. When volatility dries up, the Bollinger Bands shrink faster and end up inside the Keltner channel.
StockCharts ChartSchool documents this as the volatility part of the TTM Squeeze, introduced by John Carter. The squeeze is on when the upper Bollinger Band is below the upper Keltner line and the lower Bollinger Band is above the lower Keltner line. The settings it lists are Bollinger Bands at 20 periods and 2 standard deviations, and a Keltner channel at 20 periods with a 1.5 ATR multiplier. The squeeze "fires" when the Bollinger Bands expand back outside the channel.
An illustrative 4-hour bitcoin example:
| Squeeze on | Squeeze fires | |
|---|---|---|
| Middle line (20 EMA) | $68,000 | $68,150 |
| Keltner lines (1.5 x ATR of $600) | $67,100 and $68,900 | $67,250 and $69,050 |
| Bollinger Bands | $67,300 and $68,700 | $67,050 and $69,250 |
| Close | $68,050 | $69,100 |
- Entry: $69,100, the close of the bar on which the bands expand and price leaves the channel upward.
- Stop: $67,900, below the middle line. Risk is $1,200.
- Target: $71,500, which is 2 times the risk.
The squeeze tells you a larger move is likely, not which way. Direction comes from the bar that breaks out, so wait for a close, not an intrabar spike.
Keltner Channel vs Bollinger Bands vs Donchian channels
All 3 draw an envelope around price. They measure width in different ways, and that changes how they behave.
| Keltner channel | Bollinger Bands | Donchian channel | |
|---|---|---|---|
| Centre | 20-period EMA | 20-period SMA | Midpoint of the high and low lines |
| Width | 2 x ATR(10) | 2 standard deviations of closes | 20-period highest high and lowest low |
| Shape | Smooth, even width | Pinches and balloons quickly | Stepped, flat until a new extreme prints |
| Reacts to a shock | Gradually | Fast | Only if a new high or low is set |
| Credited to | Chester Keltner, Linda Bradford Raschke | John Bollinger | Richard Donchian |
| Typical use | Trend pullbacks, breakouts | Squeezes, stretched closes | Pure breakout entries and trailing exits |
Keltner channel vs Bollinger Bands. StockCharts names 2 differences. Keltner uses ATR where Bollinger uses standard deviation, and an EMA where Bollinger uses an SMA. The result is that Keltner channels are smoother. Smooth lines suit trend work. Bollinger Bands suit volatility work, because the width itself is the signal.
Keltner vs Donchian. A Donchian channel has no average in it. Its lines are the highest high and lowest low of the last 20 periods, so a touch of the line is a new 20-period extreme. It is the classic entry for trend following systems. A Keltner break can happen without a new 20-period high, so it tends to signal earlier and fail more often.
A related tool is the Supertrend indicator, which also uses an ATR multiple but shows only 1 line at a time and flips sides. Supertrend is a stop line. A Keltner channel is a map of normal range.
What are the best Keltner channel settings?
The default (20, 2, 10) is a sound start on any liquid market. Investopedia explains the trade-offs: a longer EMA lags more, a shorter one reacts faster but blurs the trend, and a larger multiplier means price reaches the lines less often.
The table gives starting points to test.
| Use | EMA | ATR multiplier | ATR period | Note |
|---|---|---|---|---|
| Scalping, 1 to 5 minute charts | 20 | 1.5 | 10 | Tighter lines give more signals and more noise |
| Intraday, 15 minute to 1 hour | 20 | 2 | 10 | The standard setting |
| Swing, 4 hour to daily | 20 | 2 to 2.5 | 10 or 20 | Wider lines keep you in multi-day trends |
| Squeeze detection | 20 | 1.5 | 20 | Paired with Bollinger Bands at 20 and 2 |
By market:
- Crypto: sharp spikes around the clock. A multiplier of 2.5 or more filters routine closes outside the channel.
- Forex majors: the default works on 1-hour and 4-hour charts. Expect false breaks between sessions.
- Stocks and index ETFs: overnight gaps are common, and ATR already counts them.
- Commodities: volatility clusters around scheduled reports, so check the width before the release.
Change 1 input at a time and compare results over at least 100 trades.

What are the limits of Keltner channels?
- Lag. Both inputs are averages. The channel turns after price has turned, and widens after volatility has risen.
- Trends ride the lines. Fading the upper line in an uptrend loses repeatedly.
- Ranges break the breakout setup. In a sideways market, closes outside the channel reverse more often than they follow through.
- The squeeze has no direction. The first break can be false.
- Settings change the story. A 1.5x channel and a 3x channel give opposite impressions of how stretched price is.
Pair the channel with a tool that answers a different question. StockCharts shows it alongside StochRSI and CCI for momentum confirmation.
Using Keltner channels in a prop firm challenge
At Velotrade, a multi-asset prop trading firm offering simulated, educational evaluations, you can trade crypto, forex, stocks, index ETFs and commodities on DXtrade. Maximum drawdown is static, fixed from the starting balance. On a $100,000 CLASSIC 1-Step evaluation the daily loss limit is 4% and the static maximum drawdown is 7%.
Take the pullback trade from Strategy 1. The stop-loss sits $3.75 from entry. Risking 0.5% of the account is $500, so the position is $500 / $3.75 = 133 shares. A full loss uses one eighth of the $4,000 daily limit. If ATR doubles, the stop distance doubles and the share count halves. The dollar risk stays the same.
Take pullbacks only in the direction of the higher timeframe slope, and stop for the day after 3 losses, since breakout setups fail in clusters when a market is ranging.
Sources
- StockCharts ChartSchool, "Keltner Channels": Chester Keltner's 1960 rule, Linda Bradford Raschke's ATR version, the (20, 2.0, 10) defaults, trend and breakout readings, and the comparison with Bollinger Bands.
- Investopedia, "Keltner Channel: Definition, How It Works, and How to Use": the EMA and ATR formula, typical periods and how the settings change the channel.
- StockCharts ChartSchool, "TTM Squeeze": the squeeze definition, the settings used and John Carter's attribution.
- StockCharts ChartSchool, "Price Channels": the 20-period high and low lines also known as Donchian channels.
Frequently Asked Questions
About the author

Gianluca Pizzituti
Chief Executive Officer
Formerly on the derivatives desk at Dresdner Kleinwort in London, then founded and ran a proprietary HFT firm in FX and equity indices out of Singapore.
Velotrade was founded in Hong Kong in 2016 by a team from JP Morgan, Dresdner Kleinwort and Bank of America, has facilitated over $2.5 billion in trade-finance payments, and has been featured in Bloomberg, the Financial Times, the Wall Street Journal and on Nasdaq. Its prop trading evaluations are simulated and educational.
View author page




