Get 20% off all challenges

Parabolic SAR: How the Stop and Reverse Indicator Works

Parabolic SAR explained: Wilder's stop and reverse formula with a worked example, the 0.02 and 0.20 settings, 3 trading strategies and when the dots fail.

Gianluca Pizzituti••14 min read
Share article
Parabolic SAR: How the Stop and Reverse Indicator Works

One account, every market we offer

Explore all markets

Parabolic SAR is a trend-following indicator that prints a dot below price in an uptrend and above price in a downtrend, and each dot is a ready-made trailing stop level. When price touches the dot, the trend is treated as over and the dots flip to the other side. SAR stands for stop and reverse.

The appeal is that it answers 2 questions at once: which way is the trend, and where should the stop be right now. The cost is that it is always on one side of the market, so it gets chopped up when there is no trend. This guide walks through the formula bar by bar, the 0.02 and 0.20 settings, 3 ways to trade it and the conditions where you should switch it off. It is one of the trend tools in our guide to technical indicators.

Quick answer: Parabolic SAR was introduced by J. Welles Wilder in his 1978 book New Concepts in Technical Trading Systems. Each new dot moves toward price by an acceleration factor that starts at 0.02, rises by 0.02 with every new extreme and is capped at 0.20. Dots below price mean an uptrend, dots above mean a downtrend, and a touch of the dot flips the signal.

Highlights of this article

  • J. Welles Wilder published the indicator in 1978 as the Parabolic Time/Price System, in the same book as RSI and ATR
  • Each dot closes part of the gap to the trend's extreme point, and the share it closes grows from 2% to a maximum of 20%
  • The default settings are a start of 0.02, a step of 0.02 and a maximum of 0.20
  • The dots work best as a trailing stop in a trending market and give repeated false flips in a range
  • Parabolic SAR shows trend direction only, so it needs a separate filter for trend strength

What is Parabolic SAR?

Parabolic SAR is a price overlay made of dots, one per bar. In an uptrend the dots sit under the candles and rise every bar. In a downtrend they sit above the candles and fall every bar. The dot is where a trader following the system would hold a stop.

According to StockCharts ChartSchool, Welles Wilder introduced it in his 1978 book New Concepts in Technical Trading Systems and called it the Parabolic Time/Price System. The name describes the shape. In a sustained trend the dots speed up and curve toward price like a parabola. The stop also tightens with every bar that passes, even if price goes nowhere.

Wilder designed it as an always-in system. When a long is stopped out, the system goes short at the same price, and the reverse. Most traders today do not use it that way. They use the dots as a trailing stop-loss and take entries from something else.

Item Detail
Indicator type Trend-following overlay and trailing stop
Created by J. Welles Wilder, 1978
Default settings Start 0.02, step 0.02, maximum 0.20
What it plots One dot per bar, below price in uptrends and above in downtrends
Main signal Price touching the dot flips the trend
Works best in Sustained trends with shallow pullbacks
Main limitation Frequent false flips in sideways markets

How is Parabolic SAR calculated?

The formula uses 3 inputs: the prior SAR, the extreme point and the acceleration factor.

Rising SAR = prior SAR + prior AF x (prior EP - prior SAR)

Falling SAR = prior SAR - prior AF x (prior SAR - prior EP)

  • EP (extreme point): the highest high of the current uptrend, or the lowest low of the current downtrend.
  • AF (acceleration factor): starts at 0.02 and rises by 0.02 each time the EP makes a new extreme, up to a maximum of 0.20.

In plain terms, each new dot moves a fraction of the remaining distance between the last dot and the trend's best price. Early in a trend that fraction is 2%. After 9 new extremes it reaches 20% and stays there.

A worked calculation over 4 bars

Assume a new uptrend. The first dot is at 100.00, the highest high so far is 105.00 and the AF is at its starting value.

Bar Prior SAR Prior EP Prior AF New SAR What price did on this bar
2 100.00 105.00 0.02 100.10 New high at 106, so AF rises to 0.04
3 100.10 106.00 0.04 100.34 New high at 108, so AF rises to 0.06
4 100.34 108.00 0.06 100.80 No new high, so EP and AF stay the same
5 100.80 108.00 0.06 101.23 The dot keeps rising anyway

The arithmetic for bar 3 is 100.10 + 0.04 x (106.00 - 100.10) = 100.10 + 0.236 = 100.34 after rounding. For bar 4 it is 100.34 + 0.06 x (108.00 - 100.34) = 100.80.

The dot rose by 0.10, then 0.24, then 0.46 as the AF grew. On bar 5 it rose again even though price made no progress.

The 2 extra rules

Both StockCharts and the TradingView Help Center list 2 conditions that sit on top of the formula:

  1. The dot cannot enter recent price. In an uptrend the SAR can never be above the lows of the prior 2 bars. If the formula gives a higher value, the SAR is set to the lower of those 2 lows. In a downtrend it can never be below the highs of the prior 2 bars.
  2. A flip resets everything. When price trades through the dot, the trend reverses. The first dot of the new trend is placed at the old trend's extreme point, and the AF goes back to 0.02.

A tablet on a desk showing a candlestick chart with indicator lines
Each Parabolic SAR dot moves a fraction of the distance toward the trend's extreme point.

What are the best Parabolic SAR settings?

Wilder's defaults are a start of 0.02, a step of 0.02 and a maximum of 0.20. TradingView calls these Start, Increment and Max Value and ships the same numbers.

Setting Lower value Higher value
Step (increment) Dots trail further away, fewer flips, later exits Dots hug price, more flips, earlier exits
Maximum Caps the acceleration sooner, wider stop late in a trend Lets the dots tighten more, stop is closer late in a trend

StockCharts notes that the step carries more weight than the maximum, because it controls how quickly the rate builds once a trend starts. So adjust the step first.

Reasons to change the defaults:

  • The market is choppy on your timeframe. Try a step of 0.01 with a maximum of 0.10 or 0.20. You get fewer reversals and you give back more at each exit.
  • You trade fast intraday moves. A step of 0.03 keeps the stop tighter.
  • You hold swing trades for weeks. A slower step fits swing trading, where a normal pullback should not end the trade.

There is no setting that suits every market. Run each candidate through backtesting on the instrument and timeframe you trade, and compare the number of flips, not only the profit.

How do you read Parabolic SAR?

Reading the dots takes 4 observations.

  • Side: dots below price mean the indicator is long. Dots above mean it is short.
  • Flip: the first dot on the opposite side marks a change of direction. This is the signal bar.
  • Spacing between dots: dots that are spread further apart each bar show a trend that keeps making new extremes. Dots that bunch together show a trend that has stalled.
  • Gap to price: a wide gap means the trend is young or price is running. A narrow gap means the stop is close and a flip is near.

What the dots do not tell you is how strong the trend is. A flip in a flat market looks the same as a flip at the start of a 200-point move. The TradingView Help Center says the indicator is not typically recommended as a stand-alone signal tool and suggests pairing it with a trend-strength measure such as Wilder's Directional Movement.

3 ways to trade Parabolic SAR

Strategy 1: flips in the direction of the larger trend

This setup ignores every flip against the main trend.

  • Filter: price is above a rising 200-period average for longs, below a falling one for shorts. Our guide to moving averages covers how to choose the length.
  • Entry: the dots flip below price while the filter says up. Enter at the close of the flip bar.
  • Stop: the current dot. Move the stop to each new dot as it prints.
  • Exit: the dots flip above price. Do not take the short side while the filter still points up.

Strategy 2: the dots as a trailing stop only

Here the entry comes from your own method, such as a breakout or a pullback. Parabolic SAR only manages the exit.

  • Entry: your own setup, in a market that is already trending.
  • Initial stop: a structure level or a multiple of ATR. The ATR indicator explains how to set that distance.
  • Hand-over: once the dot moves beyond your initial stop in your favour, follow the dot.
  • Exit: price touches the dot.

Most trend following systems use a trailing stop this way.

Strategy 3: two timeframes

Use a higher timeframe for direction and a lower one for timing.

  • Direction: the daily chart dots are below price.
  • Entry: on the 1-hour chart, wait for a pullback that flips the dots above price, then enter long when they flip back below.
  • Stop: the 1-hour dot at entry, or the pullback low if it is further away.
  • Exit: scale out at 2 times the initial risk and trail the rest with the 1-hour dots, or close everything if the daily dots flip.

Check the risk-reward ratio before each entry. If the dot is far away and the next resistance is close, the trade is not worth taking, however clean the flip looks.

A hand pointing at a line chart on a large dark trading screen
A flip in the dots is a signal to review the trade, and the trend filter decides whether to act on it.

What are the limits of Parabolic SAR?

  1. Whipsaws in ranges. In a sideways market price crosses the dots every few bars. Each flip is a small loss, and they add up quickly.
  2. No measure of trend strength. The indicator is always long or short. It has no neutral state to tell you to stand aside.
  3. The stop distance is not tied to volatility. The first dot after a flip sits at the prior extreme, which may be very far or very close. Position size has to adapt to that distance on every trade.
  4. Acceleration can exit a good trend early. Late in a long trend the AF is at 0.20 and the dots are tight. A normal pullback can then end the trade just before the trend continues.
  5. Gaps and fast moves. The dot is a level, not a guarantee. Price can gap through it and fill a stop order at a worse price.

Parabolic SAR vs Supertrend, ATR stops and moving averages

All 4 tools can trail a stop behind a trend. They differ in what sets the distance.

Feature Parabolic SAR Supertrend ATR trailing stop Moving average
Distance set by Time and new extremes ATR x multiplier around the bar midpoint ATR x multiplier from close or high Average of past closes
Tightens over time Yes, accelerates No, only when price or ATR moves No No
Adapts to volatility Indirectly Yes Yes No
Flips to the other side Yes Yes No, exit only Price crosses it
Typical defaults 0.02, 0.02, 0.20 ATR 10, factor 3 14-period ATR, 2x to 3x 20, 50 or 200 periods
Weak spot Ranges, late-trend exits Ranges, wide stops after spikes No direction signal Slow to react

The closest relative is the Supertrend indicator, which also flips between a line under price and a line over price. The key difference is acceleration. Supertrend holds its distance until price or volatility changes. Parabolic SAR keeps closing in as bars pass. That makes the dots better at protecting profit in fast, steep moves, and Supertrend better at sitting through slow trends with deep pullbacks.

Using Parabolic SAR in a prop firm challenge

In a prop firm challenge the dots are most useful as a stop discipline. Every trade has a stop from the first bar, and that stop only ever moves in your favour. Velotrade offers simulated, educational evaluations on DXtrade across crypto, forex, stocks, index ETFs and commodities, so the same rules can be tested on markets that trend in different ways.

Three habits keep the indicator inside the rules:

  • Size from the dot. Risk per trade divided by the distance from entry to the dot gives the position size. A far dot means a smaller position. The position size calculator does the arithmetic.
  • Do not reverse automatically. Stop and reverse doubles the number of trades. In a range that can drain a daily loss limit in one session. Take the stop, then wait for the filter.
  • Respect the fixed floor. The maximum drawdown is static, set from the starting balance and never moved. Losses from whipsaws do not reset. See static maximum drawdown explained.

Funded traders keep an 80% profit split. Plans and rules are on the challenges page.

Sources

  • J. Welles Wilder Jr., New Concepts in Technical Trading Systems (Trend Research, 1978): the original Parabolic Time/Price System.
  • StockCharts ChartSchool, "Parabolic SAR": rising and falling SAR formulas, the acceleration factor, the prior 2 bars rule, and the effect of the step and maximum.
  • TradingView Help Center, "Parabolic SAR (SAR)": calculation, default inputs of 0.02, 0.02 and 0.20, the reset on reversal, and stated limitations.

Frequently Asked Questions

About the author

Gianluca Pizzituti

Gianluca Pizzituti

Chief Executive Officer

Formerly on the derivatives desk at Dresdner Kleinwort in London, then founded and ran a proprietary HFT firm in FX and equity indices out of Singapore.

Velotrade was founded in Hong Kong in 2016 by a team from JP Morgan, Dresdner Kleinwort and Bank of America, has facilitated over $2.5 billion in trade-finance payments, and has been featured in Bloomberg, the Financial Times, the Wall Street Journal and on Nasdaq. Its prop trading evaluations are simulated and educational.

View author page

Ready to trade with
$200,000 capital?

Up to 90% profit split

Keep most of what you earn

No consistency rule

News trading allowed

Payouts within 24 hours

Once approved